This is one of our smallest and lightest glue-on tracking transmitters available. Please note, for the lightest variant of this transmitter, you will need to select the "solder external wires" model, this activation method does not require an internal reed switch for your transmitter to operate, doing so saves you precious weight for studies involving extremely small species.
Technical Specifications
| Classification | VHF Radio Transmitter (150.000 - 151.000 MHz) |
| Transmitter Type | Crystal Controlled 3-Stage |
| Pulse Rate/Minute | 45/25 PPM |
| Pulse Width | 15ms |
| Operating time(D) | 40 OR 65 Days |
| Battery(V) | 393 1.55v Silver Oxide Button Cell |
| Battery Capacity | 52 mAh |
| Typical Mass(G) | 0.3g |
| Operating Temp(C) | -20ºC to +40ºC |
| Antenna | "Super-Flex" whip. |
| Activation | By soldering OR removing external magnet (slight weight added) |
| Encapsulation | Water-proof. Electrical Resin + Black Rubber coating |
If your require custom shaped transmitters or custom potting/encapsulation apart from the standard shapes/sizes/finishes we offer, a custom transmitter can also be made upon request with rapid turnaround.
Just like traditional VHF telemetry & Tracking Transmitters, this transmitter emits a steady radio pulse for the entirety of it's lifespan, VHF tracking transmitters can be picked up by receivers from extremely far distances using VHF receivers you may already be using in the field, for even greater RF output and signal strength, 3v models will always out-perform the 1.5v variants (the trade-off is size and mass). Specific frequencies are noted on your purchased transmitter or provided with your order.
